Description
Description
The Butyl Sealing Strip main raw material is imported from foreign, which guarantees the stability of product quality at the source, and has a certain amount of adhesion and sealing performance to the abrasive tools and pinhole belt mills.It is never-curing butyl tape based on butyl rubber as main raw material matched with other additives through advanced technology. It can stick to all kinds of material surface at a strong cohesive force, meanwhile it has excellent weather resistance, aging resistance and waterproof performance. It can make effects of sealing, shock absorption, protection. The product is one kind of extremely advanced waterproof sealing material with no solvent, no shrink, no poisonous gas, never cured, and has the extremely good tracing property to the object surface under conditions of heat expansion cold contraction and the mechanical deformation.
Features
1. High bond strength and high tensile strength, good elasticity, good elongation performance, strong adaptability to base condition changes and cracking, and excellent tracing ability to the shape changes of the substance.
2. Excellent chemical resistance, weather fastness and corrosion resistance.
3. Excellent adhesion, water resistance, sealing, high and low temperature resistance, high stability in sizes.
4. The material is environment-friendly, non-toxic and tasteless, and the construction operation is simple.
5. Applicable temperature range: -15 to 45 ℃ can be used
Application area
Construction sector Used for waterproofing of steel structures, waterproof and thermal insulation engineering, tunnels, etc.
Composite material field Used in vacuum introduction processes, such as the production of wind power blades, yachts, aerospace and other
Home appliance field Applied to the vibration reduction, damping, noise reduction and sealing of household appliances
Home Civil Field Waterproof for doors, windows, roof ventilation ducts,color steel plate and sunshine house engineering etc
Automotive Waterproofing, sealing, beauty, etc. for home use
Tape Size
Standard Roll:
1.0mm*20mm*20M 1.0mm*50mm*20M 1.0mm*100mm*20M
1.5mm*20mm*20M 1.5mm*50mm*20M 1.5mm*100mm*20M
2.0mm*15mm*20M 2.0mm*50mm*20M 2.0mm*50mm*20M
3.0mm*12mm*15M 2.5mm*11mm*15M 2.0mm*12mm*20M
Size Range:
|
Material |
Butyl rubber |
|
Thickness |
0.5mm-5mm(customize) |
|
Width |
5mm-200mm（customize） |
|
Length |
5m,10m,15m,20m（customize） |
|
Butyl color |
Black,White,Grey or other |
|
Storage |
It should be stored in dry and ventilated environment, to avoid being stored at above 45 ℃ temperature for a long time. |
Application Instruction
1: Clean up
Before the construction, the surface of the base must be cleaned or wiped clean, and keep dry without water,floating soil or oil.
2: Tear off
Tear off the release film on the back of the butyl tape and paste it on the gap.
3: Paste on
After the butyl tape is pasted, the overlapped part shall be pasted on the tape and compact, so that the butyl tape can fully bond with the base layer on both sides.
PRODUCT DATA SHEET
Property
Test Method
Typical Values
Color
ASTM D1729
Gray,Black
Color
None. Will not contaminate
sweet butter
Service Temperature
-40 Deg.F to 215 Deg.F
Cone Penetration, 300 g
ASTM D217
75 – 90 dmm
% Solids
ASTM C771
90% by weight
Specific Gravity
ASTM D297
1.55 +/- 0.05 g/cm3
Weight per Gallon
13.7 +/- 0.5 pounds per gallon
Tensile Yield
ASTM C907
20 – 25 psi
Migration
ASTM C772
Pass. No migration, contact stain
only.
Elongation
ASTM C907
600%
Freeze-Thaw Stability
100,000+cycles
of 6-min @ -10 deg.F
+2-m @ 80 degF
Pass
square shape or round shape is ok.
